![]() ![]() The instrument VISA resource name should appear under the GPIB controller resource as GPIB::::INSTR. NI-VISA will attempt to identify the connected GPIB instrument by conducting a FindLstn() test and a *IDN? query. In MAX, select the GPIB controller and select Scan for Instruments.After the controller has been successfully recognized, securely connect the GPIB instrument to the controller via a GPIB cable and power it on.If you are unable to see the controller, refer to Cannot Detect NI GPIB-USB HS Device in MAX. If not specified, the controller number defaults to 0. You should see the VISA resource name of the NI GPIB controller listed as GPIB::INSTR where is the controller number. In Measurement and Automation Explorer (MAX), NI-VISA detects the instrument and creates the VISA resource that you use to communicate with the instrument. If you are using an NI GPIB controller or a NI GPIB-ENET device, refer to the GPIB Hardware Installation Guide to install the hardware. NI-488.2 and LabVIEW Version Compatibility.NI-488.2 Supported Versions for GPIB Devices and Modules.NI-VISA and LabVIEW Version Compatibility.NI-VISA and Operating System Compatibility.LabVIEW and Microsoft Windows Compatibility. ![]() Refer to the following for compatibility information. Install the latest compatible version of LabVIEW, the NI-VISA driver, and the NI-488.2 driver.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |